Login
| 8 Products In This Category |
Popularity  | Name
|
 |
Netgear WG-302NA ProSafe Wireless Access PointFeatures IEEE 802.11g 54 Mbps Wireless Access Point (2) 5 dBi detachable antennas Typical Maximum Power Output: 19.8 dBm Typical Maximum Receive Sensitivity: 96 dB 10BaseT/100BaseTX/RJ-45 port with Auto Uplink (Auto MDIX) with IEEE 802.3af Power over Ethernet (PoE) support 1 console port with standard RS-232C interface with DB-9 male connector 2 reverse SMA antenna connectors Processor: Intel 422 Memory: 8MB Flash, 16MB DRAM LEDs: power, test, 100 Mbps, Link/ACT, and WLAN 802.11g Network Management: Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI). SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB Wireless Distribution System Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Simultaneous wireless bridge and access point mode Adjustable output power control from 100 mW down to 0 mW Security: 40/64-, 128-, and 152-bit WEP encryption, Block SSID B |
from 12 stores |
 |
NetGear FS105NA 5 port SwitchFeatures Included: switch, power adapter, mounting kit, and installation manual IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3x Full-Duplex Flow control Connectors: ( 5) 10BaseT/100BaseTX/RJ45 ports Collision/Rx/Rx and speed indicators Link and duplex indicators built-in to each Vista RJ45 port Forward Rate ( 10Mbps port): 14,800 packet/sec Forward Rate (100Mbps port): 148,000 packet/sec Latency (10 ~ 100 Mbps): 75 usec max MAC addresses: 1,000 10/100 Buffer Memory: 200 KB per port Forward Mode: Store-and-Forward Approvals: CE, FCC A, CISPR A, VCCI A, CSA, TUV, UL Power: 12 VDC, 7.5W; Power adapter included Size: W 9.3 in; H 1.1 in; D 4.1 in Weight: 1.25 lbs |
from 9 stores |
 |
NetGear FS-605NA 5-Port Switch 10/100Mbps Router KitFeatures Powerful plug-and-play switch connects at 10 or 100 Mbps and makes it easy to link as many as five computers or peripherals to your Ethernet network Auto Uplink on the ports adjusts for the different types of Ethernet cables Sleek case has lights on the front for easy monitoring Includes switch, AC power adapter vertical stand, wall-mounting screws, installation guide, and support information card Specifications Connectors: (5) 10BaseT/100BaseTX/RJ45 ports; all ports have Auto Uplink (Auto MDI-X) Forwarding modes: Store-and-forward Addressing: 48-bit MAC address Approvals: CE, FCCB, C-Tick, EN55 024, TUV Requires: Cat. 5 UTP Ethernet cables, Network card for each computer, Network software such as Windows, Macintosh, or Linux |
from 9 stores |
 |
Netgear WG-102NA Wireless Access PointFeatures Included: ProSafe 802.11g Wireless Access Point WG102, (1) 5 dBi detachable antenna, resource CD, power adapter, ethernet cable, installation guide, manufacturer warranty/support information card Standard: IEEE 802.11g 54 Mbps Antennas: 5 dBi detachable 2.4 GHz LAN Port: 10/100BASE-T Ethernet (RJ-45) port with Auto; Uplink (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support Antenna: reverse SMA connector 4 LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI). SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB. Bridging and repeater mode Adjustable transmit power control 100 mW down to 0 mW Power Output: 802.11b mode, 1 to 11 Mbps +19 dBm; 802.11g mode, 6 to 24 Mbps +18 dBm; 802.11g mode, 36, 48 and 54 Mbps +17/16/16 dBm Receive Sensitivity 802.11b: 2 Mbps -93 dBm, 5.5 Mbps -91 dBmk, 11 Mbps -89 dBm Receive Sensitivity 802.11g: 6 M |
from 9 stores |
|
NetGear WG-102NA Wireless Access PointFeatures IEEE 802.11g 54 Mbps Antennas: (1) 5 dBi detachable 2.4 GHz LAN Port: (1) 10/100BASE-T Ethernet (RJ-45) port with Auto, Uplink (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support Antenna: (1) reverse SMA connector LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI). SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB Bridging and repeater mode Adjustable transmit power control 100 mW down to 0 mW Power Output (Typical Maximum): 802.11b mode, 1 to 11 Mbps +19 dBm; 802.11g mode, 6 to 24 Mbps +18 dBm; 802.11g mode, 36, 48 and 54 Mbps +17/16/16 dBm Receive Sensitivity 802.11b: 2 Mbps -93 dBm, 5.5 Mbps -91 dBm, 11 Mbps -89 dBm Receive Sensitivity 802.11g: 6 Mbps -91 dBm, 9 Mbps -90 dBm, 12 Mbps -89 dBm, 18 Mbps -87 dBm, 24 Mbps -84 dBm, 36 Mbps -81 dBm, 48 Mbps -77 dBm, 54 Mbps -75 dBm, 108 Mbps -73 dBm Security: Wi-Fi Protected Access |
from 9 stores |
1 |
|---|